Search This Blog

Saturday 21 February 2015

Regenerative Receiver #4

Hi gang!

This Winter, after a ~4 year hiatus from regenerative receivers, I built 4 while studying the plethora of published designs in print and on the web. How do you describe the sounds that regens deliver? Perhaps the adjective "screechy", or adjective-verb phrase "alive with vibe" might do ---  and when tuning across a SWL band they emit those classic wee-woo sounds that signal we're close to receiving some yet unknown, far off, station.

Many regen authors boast "high performance" or, like a Markov chain, their boosted outcome appears dependent on the state of whatever modulation mode your tuning -- or which knob your tweaking at the moment. Few measures are ever shown in the regen literature. Some designers embrace minimalism, while others unleash parts with fits of fury. Compromise, subjectivity, mysticism, sci-fi, nostalgia ---- it's all here. Joy.

As a mere regen receiver student, I'll offer my experiments with my regen #4 in hopes they might prove useful at some level.

My inspiration for this particular receiver comes from the work of simply amazing builder Makota, 7N3WVM. While a minimalist, his designs pitch common sense innovation and deliver maximum spark for us experimenters.

Makota's website:  http://www.qsl.net/7n3wvm/

The base receiver for my design may be seen at  http://www.qsl.net/7n3wvm/regen.html

It features a Colpitt's oscillator AC coupled to the tank for the Q multiplier plus a separate, low current FET detector. Many have copied/adapted his core regen design, including Dan, N1BYT in the WBR. Dan added his balanced LC circuit with ultra super-light coupling.  Dave, AA7EE also applies a SPRAT fueled Makota design in his Sproutie receiver.

Regen #4 schematic Part 1

Regen #4 schematic Part 1

 
Above — The entire regen #4 schematic.

I'll discuss the stages from left to right.

RF Preamplifier

We hear it over and over --- regens leak RF from the tank to the 'tenna. The often used, common base, or common gate RF amplifier serves as my favorite way to boost antenna-to-tank isolation, plus allows the use of crappy antennas when antenna space gets constrained.

The 500 Ω pot also reduces leakage and I normally just open it "a crack" since my antenna is a full sized 1/4 wave vertical on the 40M Ham band and the preamp offers gain.

No question — if you run the RF gain pot too wide open -- on a strong signal, you may cream the otherwise well behaved regen circuitry and make some bad noises.

The worst case antenna port leakage of regen #4: ~-41 dBm.

Above — The worst case antenna port leakage of regen #4: ~-41 dBm.  In this experiment, I turned both the RF gain and the regen pots fully clockwise! The rig was writhing in spasm with such a setting --- normally both are set close to fully counter clockwise.

Typical AM reception antenna port RF leakage.

Above — Typical AM reception antenna port RF leakage.  I listened to some AM stations like Radio Habana and others farther up the 49M band. With typical AM RF gain and regen control settings, the leakage out of the antenna connector was -73 dBm.
So the leakage will fall somewhere between the worst case and typical for AM reception -- I can live with that.

Feel free to drop the preamp current by increasing the 3K3 resistor. When I hear the word preamp, I think "run some current" -- even, still, it's just 2.24 mA.

Regen #4 breadboard

Above — Regen #4 breadboard

Regen #4 breadboard front view.

Above — Regen #4 breadboard front view. I once read you gotta run a chicken-head knob to really wrestle the audio pot into submission on a regen.

Tank and Q Multiplier

I ran a single, grungy, air-variable capacitor for tuning. My receiver tuned 6.69 - 9.2 MHz
but lacked the fine tuning needed for proper SSB and CW work. I suggest that builders apply standard VFO techniques like a few C0G/NP0 fixed capacitors for temperature stability and some way to provide fine tuning such as a small delta C capacitor in parallel with the other tank parts, or perhaps, a gear reduction tuning knob.

I can't stand temperature drift in my receivers, but varactor (or rectifier diode) tuning might work.

The 8:29 turns inductor ratio is ripe for experiments. As you reduce the smaller winding from 8 turns too a lower N, more of the RF amp's signal will shunt to ground via the collector's 0.1 µF bypass capacitor. I also built a version with no RF amp.

I built the Colpitts oscillator first, added the LC tank and then watched the signal amplitude and frequency in my 'scope + frequency counter as I turned the tuning capacitor. The old make a stage ---  then test that stage thang.
Then I built the RF preamp,detector and AF preamp.

A 470K resistor isolates the Colpitt's parts from the front panel 10K DC bias (Colpitt's amplitude) control. The 22K resistor sets the maximum Colpitt's amplitude and the 3K3 R, the minimum. You may have to experiment with the 3K3 resistor to find the resistor value that allows the Colpitts to just barely turn off but not go to 0 VDC.

If you omit this resistor, you'll hear what it does -- as you slowly turn the 10K pot clockwise from fully counter clockwise, a "bump" sounds as the BJT turns on. You apply the nearest standard value resistor that just eliminates that bump; for me it was 3K3 Ω.

I omitted the 10 µF bypass capacitor 'tween the wiper and 470K resistor in my design from Makota's original design since it causes a small response delay when changing the 10K pot.

Detector and AF Preamplifier

I extended Makota's detector by morphing it to a hybrid cascode.The hycas detector hikes reverse isolation plus lifts the output AF voltage and impedance.

1 experiment worth considering: Remove the 6K8 source resistor and solder a really short lead to a 10-25K pot wiper and 1 outside terminal. While listening to some signals, adjust the pot to find the sweet spot yielding the best sensitivity + AF gain. Remove the pot, measure its resistance and replace it with a nearest standard value resistor. After that, you might try the same procedure with the 2K7 collector resistor while listening to some strong signals. That's how I came up with my values as shown in the schematic.

In regen #4, most of the AF voltage gain occurs in the detector plus the following feedback pair.
The shunt feedback pair is a low-level only, cheesy, popcorn preamplifier I often throw in my experimental receivers. While this preamp looks crazy and won't win awards for temperature stability, its harmonic distortion is reasonably low:

An FFT of the regen #4 AF preamplifier @ ~1 KHz.

Above — An FFT of the regen #4 AF preamplifier @ ~1 KHz. The 2nd harmonic lies 52 dB down while all others are > 62 dB down. For low-level applications only. 2.52 mA total current.

You've noticed the 180 pF cap from output to input? Without a 100 - 220 pF cap in parallel with the 100K feedback cap to lower the preamplifier bandwidth, you'll hear audio oscillation.

DC Voltage

I ran my standard, homebrew, well filtered 12.2 volt DC power supply for my regen and heard no hum. Many prefer a battery supply and in that case, its a good idea to add a voltage regulator to keep a steady DC current in the Q multiplier and detector stages as the battery fades. Ensure you decouple and bypass well in any case.

An example ripple filter used to scrub off noise from the DC supply


Above — An example ripple filter used to scrub off noise from the DC supply. I might place this after a voltage regulator going to the Q multiplier and detector. If you use such a filter, a decoupling resistor plus bypass capacitor is still required in every stage of the receiver as shown in the regen #4 schematic.

AF Power Amplifier

In most regens, you'll see a 10 µF or so capacitor between pins 1 and 8 of an LM386 — this cranks up the gain to 200 and with it; noise and distortion.

I'm going to make 2 bold statements: [1] The LM386 in the low gain mode with some minor tweaks makes a very nice audio power amp. [2] It's unlikely you could build an AF power amp with the same clean average power capacity having the same or less distortion.

An LM386N-4 schematic with the needed bypass and feedback tweaks to make it sing sweetly


Above — An LM386N-4 schematic with the needed bypass and feedback tweaks to make it sing sweetly like Montserrat Caballé.  I showed the functional schematic earlier. Most LM386 users stick a capacitor between pins 1 and 8 which bypasses the 1.36K emitter resistor and this application (OK in some situations) resulted in the LM386 getting labels such as "a distortion machine", or a "compromise part". I continue to applaud the team that designed this part.

I've applied the LM386 like this for years, but have never shown any measures. Here we go:
 
An FFT of an LM368N-4 driven with ~ 1KHz sine wave to output 3.06 Vpp into an 8 Ω resistor load.

Above — An FFT of an LM368N-4 driven with ~ 1 KHz sine wave to output 3.06 Vpp into an 8 Ω resistor load. The second harmonic is ~ 64 dB down! At this drive, the power = Vpeak ^2 / 2R -- so (1.53 * 1.53) / 16 = 146 mW.

This is roughly the clean power you'd get from a 2N4401/2N4403 complimentary pair;  however, to get distortion this low would take some serious engineering, parts and measurement for the average Ham experimenter.

I cranked up the drive to output 5.27 Vpp

Above — I cranked up the drive to output 5.27 Vpp: Average power now = (2.635 * 2.635) / 16 = 434 mW. Look, the distortion remains low.

The time domain output with my LM386 driven to the point where I can just detect signs of distortion: 5.71 Vpp or 520 mW.

Above — The time domain output with my LM386 driven to the point where I can just detect signs of distortion: 5.71 Vpp or 520 mW.

 Adding back the FFT shows the harmonics are still down ~ 52 dB  from the fundamental. Still reasonable at over 1/2 W.

Above — Adding back the FFT shows the harmonics are still down ~ 52 dB  from the fundamental. Still reasonable distortion at over 1/2 W power.

Pushing the drive to get obvious clipping of the sine wave results in a 2nd harmonic of -40 dBc.

Above — Pushing the drive to get obvious clipping of the sine wave results in a 2nd harmonic of -40 dBc. That's my threshold of allowable distortion tolerance in a popcorn radio AF PA. P = 599 mW. At normal room volume, you might get this on some stronger signal peaks.

The 4 controls on a regenerative receiver keep your hands busy. Some combination of those 4 tweaks will give you the best sounding audio and hopefully keep the signal level where minimal clipping of peaks occurs.

The LM386 seems OK in my book. If these experiments don't show the benefits of measurement, then I'm afraid nothing will. 

In regen #4, my strategy included building up most of the the AF voltage gain with the hycas detector + a feedback amp using relatively low noise 2N4401 BJTs.  The LM386 adds some gain, but minimal and the result is a popcorn, relatively low noise + distortion AF chain that sounds OK.

No question, some builders can build a better AF mousetrap and I encourage them. However, for a low-fi regen receiver, I posit the LM386 in low gain mode with some tweaks will save a lot of parts plus space and give reasonable AF into a speaker. As ever, you'll decide what works best.

Out Takes

A double-tuned tank featuring varactors as the variable C.


Above —A double-tuned tank featuring varactors as the variable C. At some point, I'll couple it to a Q multiplier and take a look. I built a ton of regen-related circuits in Jan - Feb 2015. Great fun.

A sweep of the above double tuned circuit tuned at 6. 37 MHz.

 Above — A sweep of the above double tuned circuit tuned at 6. 37 MHz. The higher than expected insertion loss arose from the mismatch at the output end ( 29t : 10t ), plus the low Qul of the varactors.

A GPLA generated transfer function

Above — A GPLA generated transfer function. I designed the 49M band double-tuned circuit with the LADPAC software that ships with EMRFD.

Addendum:

A ton of people view this blog by clicking on links from Twitter. I joined up -- see My Links

Thank you


QRP-POSDATA for April 9, 2015

Please click here for an interesting thread post by  'Bear' NH7SR who built his own version of Regen #4

Also consider looking at the slightly tweaked version of the detector in Regen #5. Click here.
I prefer the common gate RF pre-amp in Regen #5.

15 comments:

  1. Todd - this is great. Really great. Has anyone used a hycas arrangement to boost the AF output from an infinite impedance detector before? (well, not infinite, but very high - but you know what I mean). It's a neat idea, and I'm looking forward to giving it a try when I build another regen. I'm wondering if this is a first. Either way, it's great to see some improvements on this tried and trusted "classic" topology. Increasing the isolation between the regen control and the Q-multiplier with that 470K resistor is an interesting move too. Am interested to see how that changes things.

    Good stuff! You're giving me things to think about for my next project. Thank you Todd!

    Dave
    AA7EE

    ReplyDelete
  2. A very clever idea to separate the Q-Multiplier and the detector stages, so that each stage can be optimized for its purpose. I have built a regenerative receiver which has a hybrid cascode (T2, T3) stage as a Q-Multiplier and a Drain Bend Detector (T1) with a FET. Schematic is at http://www.uploadarchief.net/files/download/modifiedbeast-01regen.gif

    ReplyDelete
  3. Glad to see your latest experiments with the wonderful world of regenerative receivers. Given your emphasis on measurement, it might be interesting to measure the sensitivity and dynamic range of these little critters. Somebody on regenrx did that a while back, but it's always nice to see more numbers.

    In particular I'm always curious about the following case: given a crowded band with many strong signals (say, 40m during a contest), and given a weak signal you're trying to dig out of the noise, how well can the regen fare in practice? Say you have a very good DC receiver that can hear a weak DX signal among all the other strong signals. Can the regen, with careful tweaking of input attenuation and regeneration, also retrieve the signal?

    Also, since you're playing with regens now, I just thought I'd mention that there are three lesser-known, but very deep and very interesting rabbit holes that can consume endless hours of fascinating investigation. These rabbit holes are: (1) equalising the regeneration level across the entire tuning range such that the regeneration control need not be adjusted at all when the receiver is tuned, (2) decoupling of the regenerated bandwidth and the oscillation amplitude such that regenerated tank Q stays the same even as oscillation amplitude is increased, and (3) removing the frequency shift with regeneration adjustment. There's a guy at theradioboard.com who has done significant work in all these three areas and I've reproduced some of his results. It's fascinating stuff.

    Anyway, I look forward to whatever new regenerative projects and measurements you have in store.

    ReplyDelete
  4. I second qrp-gaijin's request for measurements of the sensitivity and dynamic range. In addition, your assertion that NPO/COG caps are best for this application merits experimental validation. I suspect that the toroid has a positive temperature coefficient, and so the cap may need to go negative to counter the former's drift. Can you also compare the separate detector with classic regenerative circuits to find out if the former results in better performances?

    ReplyDelete
  5. Many thanks for all your comments guys.

    With respect to L C resonator temperature stability: I cover L-C oscillator temp drift in the QRP/SWL HB archive 2010-2011 | VFO - 2011. (I generally don't repeat stuff I've written about before). It's the builder’s job to cancel temperature drift if they measure it (or even care about it).
    Also, please refer to EMRFD.

    Many add PN junction(s) to a tank for tuning, or biasing, or clamping etc. --- then it can get crazy.


    I also didn't assert that applying NP0/C0G tanks caps is best --- however, do recommend them as part of one L C tank temperature compensation approach per my aforementioned archive page.


    As far as measuring MDS and DR goes -- I won't be doing that either :>

    I’ve ranked what was popular on the old web site: the older, less technical stuff got way more hits. Then, too, in emails for this blog, a few readers requested less measurement-focused stuff and asked me to return to some simpler fun stuff on occasion.

    Then when I do --- others write and say I’m not doing enough measures! Can’t win!
    After ~15 years of posting electronics stuff on the web, I’ve learned the following: you won’t please everyone; some readers are lovely; while others act hostile and I just do this for fun and whimsy.

    I’ll give my completely respectful opinions below -- knowing that some aim to make high performance regen receiver. As a very ignorant regen newbie, I personally don’t even know what that means due to lack of good data -- the pleural of anecdote is not data.

    For MDS ---if you connect up your antenna and hear some band noise --- that’s good enough for most regens.

    For DR – I’ll go out on a limb and guess that most builders don’t build and listen to regens for their strong-signal handling capabilities. Some EEs and hams even debate published IP3 and blocking dynamic range measures when comparing commercial or better homebrew receivers.

    I remain uncertain how any results would offer a useful means of comparison considering the compromise nature of regens and/or a myriad of variables such as 2-tone bandwidth at what spacing?, or should it be 1 tone testing? --- the always threatening instability of RF/AF parasitics, the effects of bread boarding techniques, noise floor issues. …… Also many use them for AM and not SSB etc.

    I mostly just listen to SW AM signals with my regens and there are so few stations now, that blocking isn't much of an issue anymore.


    Thanks again -- Best!
    T

    ReplyDelete
  6. Great stuff Vasily and once again - thanks for posting this. I'm building the front end of the regen #4 as we speak. There is a surprising amount of whit-ish noise coming out of the popcorn pre-amp (even when the Q-mult is not oscillating) , but that may be something I'm doing wrong and will hopefully be solved soon.

    My question is about the 3.3K resistor in series with the regen pot and ground. You say that it should be selected so as to eliminate the "bump" heard as the BJT switches on but surely you don't want to eliminate that bump? When receiving AM, you want to set the Q-mulitplier just below the onset of oscillation, so shouldn't the resistor value be such that it is possible to set the Q-multiplier to just below the onset of oscillation?

    I love having the results of your experiments in blog form. The blog experiment is working - at least from this reader's point of view!

    Dave
    AA7EE

    ReplyDelete
  7. Hi Dave. In my build, the 3K3 resistor kept a little bit of bias on the Q-multiplier (Q-M) with the (regen) oscillator amplitude pot at full CCW.

    At something less than ~~~0.65 VDC DC bias, the Q-M turned OFF so the pot was dead from say (** arbitrary indicators ** ) 07:00 - 0:8:00 o'clock. Then while slowly advancing the pot clockwise, suddenly at 08:05 o'clock the Q-M turned on and the Colpitts oscillator started up at a very low amplitude ------ and made "a noise" when it did.

    The 3K3 pot comprises an attempt to put just enough DC bias on the Colpitt's oscillator to keep the oscillator alive, or near-to-alive with it swinging the lowest possible AC oscillator amplitude.

    Normally I'd in a stick a 5-10K pot, find the magic R and then remove-measure-and replace that pot with the nearest standard 5% tolerance resistor. I'd measure the DC bias voltage + the AC signal at the same time -- although that's just me.

    It's not perfect (regens = a life lesson in compromise). Amplitude varies with frequency, LC ratio, and perhaps the Q of the resonator parts and even with construction methods. Also, it might be more noticeable when tuning CW or SSB than AM.

    Try without the fixed R and if it seems OK, then go without it. "Build to suit".

    Led by descriptive narrative, I think that some builders believe the Q-M is off and needs to be increased until oscillations occurs when tuning a signal. -- I think the better narrative description might go: The Q-M is an RF oscillator that is probably always on -- what we do is change how big the AC voltage swing of that oscillator runs with the (regen) amplitude control.

    When tuning an on frequency AM signal, we increase the Q-M amplitude until we hear an Audio Frequency oscillation and then back off a hair for maximum signal and selectivity.

    The high white noise level seems worrisome -- you might have a parasitic oscillation?


    ReplyDelete
  8. In light of your praise of the LM386, I thought that some might be interested in this medium wave regenerative receiver using only an LM386.

    http://theradioboard.com/rb/viewtopic.php?f=4&t=6413

    ReplyDelete
    Replies
    1. Thanks Ubuntu Noob --- I also posted a thread about it on July 11 in our Solid State Regen community : https://plus.google.com/u/0/communities/111700710411953988036

      Delete
  9. I love this cute image and the colours are so wonderful!
    Kevin Xu

    ReplyDelete
  10. This comment has been removed by a blog administrator.

    ReplyDelete
  11. You made some good quality points there. I did a search on the topic and found many people will agree with your blog.
    Kevin Xu

    ReplyDelete
  12. As long as at least 1 person agrees -- then maybe I'm probably moving in the right direction. Thanks !!!

    ReplyDelete
  13. Hi to All, many thanks fore the QRP homebuilder work and ideas, discussion etc. A built a regenerative receiver similar to the regen4 one but with a wide coverage bandfrom 1.4 to 18 MHz switching the coils by a rotary switch and a wide variable capacitor; to mantain the oscillation on all the bands I needed to increase the 39pF capacitor 150pF capacitance. The receiver works fine with all the regen's compromises, the worst problem that annoys me is the frequency drift depending of the signal level, so I have to attenuate a lot the input signal to have a sufficient reception quality in ssb and cw, on AM the phenomenon is less evident. Anny suggestion about to solve or mitigate this problem?
    73 and tnx.
    Alex IK0VAQ

    ReplyDelete
    Replies

    1. The only thing that comes to mind - try reducing the coupling of your preamp to the main tank coil.

      Delete